AtomStack A5 Pro 10W Laser Settings

Name: AtomStack A5 Pro 10W laser settings
Creator: MakerDial

10W diode · 0 official, 65 community settings

Open AtomStack A5 Pro 10W in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Plywood (8 settings) · open in finder
Paper & Cardboard (7 settings) · open in finder
Leather (7 settings) · open in finder
Plastics & Laminates (6 settings) · open in finder
Bamboo (6 settings) · open in finder
Foam, Rubber & Cork (6 settings) · open in finder
Fabric & Felt (5 settings) · open in finder
MDF (5 settings) · open in finder
Hardwood (4 settings) · open in finder
Basswood (4 settings) · open in finder
Slate, Stone & Tile (3 settings) · open in finder
Glass (1 settings) · open in finder
Stainless steel (1 settings) · open in finder
Anodized aluminum (1 settings) · open in finder
Acrylic (1 settings) · open in finder

AtomStack A5 Pro 10W settings (power, speed, passes)

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Polypropylene (Coroplast)	—	cut	62.0%	9.2 mm/s	3	—	Community source
Delrin / Acetal	—	cut	100.0%	5.8 mm/s	4	—	Community source
Bamboo	—	cut	100.0%	5.0 mm/s	2	—	Community source
Cotton Fabric	—	cut	80.0%	20.0 mm/s	1	—	Community source
Denim Fabric	—	cut	85.0%	16.7 mm/s	1	—	Community source
Felt	—	cut	60.0%	50.0 mm/s	1	—	Community source
Hardboard	—	cut	100.0%	33.3 mm/s	3	—	Community source
Cardstock	—	cut	25.0%	100.0 mm/s	1	—	Community source
Cork	—	cut	100.0%	30.0 mm/s	2	—	Community source
Faux Leather	—	cut	100.0%	20.0 mm/s	2	—	Community source
Cork	—	cut	100.0%	13.3 mm/s	2	—	Community source
Genuine Leather	—	cut	80.0%	11.7 mm/s	2	—	Community source
Bamboo	—	cut	100.0%	11.7 mm/s	2	—	Community source
Maple	—	cut	100.0%	11.7 mm/s	2	—	Community source
Walnut	—	cut	100.0%	11.7 mm/s	2	—	Community source
Cork	—	cut	50.0%	13.3 mm/s	2	—	Community source
Genuine Leather	—	cut	100.0%	11.7 mm/s	2	—	Community source
Cardstock	—	cut	40.0%	50.0 mm/s	1	—	Community source
Plywood	—	cut	95.0%	13.3 mm/s	3	—	Community source
Basswood	—	cut	95.0%	13.3 mm/s	3	—	Community source
Balsa Wood	—	cut	70.0%	5.0 mm/s	2	—	Community source
Kraft Paper	—	cut	35.0%	33.3 mm/s	1	—	Community source
Cardboard	—	cut	80.0%	13.3 mm/s	1	—	Community source
Cardboard	—	cut	80.0%	10.0 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	cut	90.0%	13.3 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	70.0%	11.7 mm/s	4	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	100.0%	46.7 mm/s	2	—	Community source
3mm Cherry Plywood	3.0 mm	cut	100.0%	50.0 mm/s	2	—	Community source
3mm Walnut Plywood	3.0 mm	cut	100.0%	50.0 mm/s	2	—	Community source
3mm Basswood Plywood	3.0 mm	cut	100.0%	1.7 mm/s	5	—	Community source
3mm MDF	3.0 mm	cut	100.0%	2.5 mm/s	4	—	Community source
Slate	—	engrave	60.0%	100.0 mm/s	1	—	Community source
Polypropylene (Coroplast)	—	engrave	25.0%	40.0 mm/s	1	—	Community source
HDPE (Cutting Board)	—	engrave	56.0%	26.7 mm/s	1	—	Community source
Delrin / Acetal	—	engrave	52.0%	33.3 mm/s	1	—	Community source
Rubber Stamp Material	—	engrave	70.0%	20.0 mm/s	1	—	Community source
Bamboo	—	engrave	45.0%	33.3 mm/s	1	—	Community source
Cotton Fabric	—	engrave	28.0%	58.3 mm/s	1	—	Community source
Denim Fabric	—	engrave	42.0%	41.7 mm/s	1	—	Community source
Ceramic Tile	—	engrave	100.0%	10.0 mm/s	1	—	Community source

Showing 40 of 65. See all in the finder.

Sponsored · Ad space available

Similar machines

AtomStack A10 Pro 10W (10W diode)
AtomStack A10 Pro V2 (10W diode)
AtomStack A20 Pro 20W (20W diode)
AtomStack A20 Pro V2 (20W diode)
AtomStack Kraft (20W diode + 1.2W IR) (20W diode)
AtomStack S20 Pro 20W (20W diode)