Monport EffI10S 100W CO2 Plywood Settings (Cut & Engrave)
9 sourced settings for plywood on the Monport EffI10S 100W CO2 (100W CO2), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 40.0% | 42.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 25.0% | 42.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 28.0% | 47.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 40.0% | 42.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 65.0% | 30.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 14.0% | 589.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 20.0% | 439.0 mm/s | 1 | 0.085 mm | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 6.0% | 546.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 14.0% | 589.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available