Monport Fireproof 60W CO2 Plywood Settings (Cut & Engrave)
9 sourced settings for plywood on the Monport Fireproof 60W CO2 (60W CO2), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 52.0% | 28.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 32.0% | 28.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 46.0% | 29.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 52.0% | 28.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 73.0% | 20.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 17.0% | 404.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 25.0% | 355.0 mm/s | 1 | 0.085 mm | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 11.0% | 446.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 17.0% | 404.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available