OMTech 40W CO2 MDF Settings (Cut & Engrave)
12 sourced settings for mdf on the OMTech 40W CO2 (40W CO2), thickness 2, 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Hardboard | — | cut | 55.0% | 12.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 28.0% | 30.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 58.0% | 28.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 28.0% | 40.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 75.0% | 30.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 45.0% | 15.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 62.0% | 8.0 mm/s | 2 | — | Community source |
| Hardboard | — | engrave | 20.0% | 200.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | engrave | 10.0% | 350.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 28.0% | 450.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 28.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
| 6mm MDF | 6.0 mm | engrave | 20.0% | 100.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available