xTool P3 80W CO2 MDF Settings (Cut & Engrave)
6 sourced settings for mdf on the xTool P3 80W CO2 (80W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| TruFlat Maple (MDF/TruFlat) | — | cut | 80% | 20 mm/s | — | — | Community source |
| TruFlat Black (MDF/TruFlat) | — | cut | 80% | 20 mm/s | — | — | Community source |
| TruFlat Linen (MDF/TruFlat) | — | cut | 80% | 20 mm/s | — | — | Community source |
| TruFlat Maple (MDF/TruFlat) | — | engrave | 50% | 600 mm/s | — | — | Community source |
| TruFlat Black (MDF/TruFlat) | — | engrave | 50% | 750 mm/s | — | — | Community source |
| TruFlat Linen (MDF/TruFlat) | — | engrave | 50% | 750 mm/s | — | — | Community source |
Sponsored · Ad space available