OMTech 60W CO2 MDF Settings (Cut & Engrave)
10 sourced settings for mdf on the OMTech 60W CO2 (60W CO2), thickness 2, 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| MDF | — | cut | 50.0% | 7.0 mm/s | 1 | — | Community source |
| MDF | — | cut | 50.0% | 5.0 mm/s | 1 | — | Community source |
| MDF | — | cut | 75.0% | 7.0 mm/s | 2 | — | Community source |
| Chipboard 2mm | 2.0 mm | cut | 44.0% | 38.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 75.0% | 30.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 65.0% | 30.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | cut | 55.0% | 18.0 mm/s | 1 | — | Community source |
| Chipboard 2mm | 2.0 mm | engrave | 15.0% | 500.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 28.0% | 450.0 mm/s | 1 | — | Community source |
| 6mm MDF | 6.0 mm | engrave | 20.0% | 250.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available