xTool P2 55W CO2 MDF Settings (Cut & Engrave & Laser cut)

Name: xTool P2 55W CO2 MDF Settings (Cut & Engrave & Laser cut)
Creator: MakerDial

16 sourced settings for mdf on the xTool P2 55W CO2 (55W CO2), thickness 2, 3, 6, 12 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
MDF / fibreboard	3 mm	cut	100%	27 mm/s	1	—	Official source
MDF / fibreboard	6 mm	cut	100%	17 mm/s	1	—	Official source
MDF / fibreboard	3 mm	engrave (bitmap)	15%	400 mm/s	1	0.1 mm	Official source
MDF / fibreboard	6 mm	engrave (bitmap)	15%	400 mm/s	1	0.1 mm	Official source
MDF / fibreboard	3 mm	engrave (vector)	15%	160 mm/s	1	—	Official source
MDF / fibreboard	6 mm	engrave (vector)	15%	160 mm/s	1	—	Official source
Fibreboard	3.0 mm	laser cut	100.0%	27.0 mm/s	—	10.0 mm	Official source
Fibreboard	6.0 mm	laser cut	100.0%	17.0 mm/s	—	10.0 mm	Official source
Fibreboard	12.0 mm	score	15.0%	160.0 mm/s	1	—	Official source
Fibreboard	12.0 mm	vector engrave	15.0%	400.0 mm/s	1	0.1 mm	Official source
MDF	—	cut	83.0%	43.0 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	cut	44.0%	38.0 mm/s	1	—	Community source
3mm MDF	3.0 mm	cut	55.0%	40.0 mm/s	1	—	Community source
6mm MDF	6.0 mm	cut	55.0%	50.0 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	engrave	15.0%	500.0 mm/s	1	—	Community source
6mm MDF	6.0 mm	engrave	20.0%	500.0 mm/s	1	—	Community source

Sponsored · Ad space available