Ortur Master 3 Paper & Cardboard Settings (Cut & Engrave)

Name: Ortur Master 3 Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

22 sourced settings for paper & cardboard on the Ortur Master 3 (10W diode).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Cardboard	—	cut	50.0%	16.7 mm/s	1	—	Community source
Cardstock	—	cut	35.0%	25.0 mm/s	1	—	Community source
Paper	—	cut	25.0%	33.3 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	100.0%	11.7 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	100.0%	4.2 mm/s	1	—	Community source
Paper	—	cut	100.0%	75.0 mm/s	1	—	Community source
Washi Tape	—	cut	30.0%	10.0 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	75.0%	80.0 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	100.0%	150.0 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	50.0%	83.3 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	55.0%	58.3 mm/s	2	—	Community source
Mylar Stencil 7.5mil	—	cut	32.0%	91.7 mm/s	1	—	Community source
Copy Paper 80gsm	—	cut	35.0%	91.7 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	45.0%	66.7 mm/s	1	—	Community source
Kraft Paper	—	cut	22.0%	58.3 mm/s	1	—	Community source
Cardboard	—	engrave	70.0%	333.3 mm/s	1	0.1 mm	Community source
Paper	—	engrave	15.0%	50.0 mm/s	1	0.05 mm	Community source
Kraft Paper	—	engrave	60.0%	333.3 mm/s	1	0.05 mm	Community source
Mylar Stencil 7.5mil	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Copy Paper 80gsm	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardstock 300gsm	—	engrave	20.0%	133.3 mm/s	1	—	Community source
Cardstock	—	engrave	15.0%	75.0 mm/s	1	—	Community source

Sponsored · Ad space available