Sculpfun S30 Pro 20W Paper & Cardboard Settings (Cut & Engrave)

Name: Sculpfun S30 Pro 20W Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

22 sourced settings for paper & cardboard on the Sculpfun S30 Pro 20W (20W diode).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Kraft paper	—	engrave	15.0%	30.0 mm/s	1	—	Official source
Kraft Paper	—	cut	18.0%	66.7 mm/s	1	—	Community source
Cardstock	—	cut	20.0%	75.0 mm/s	1	—	Community source
Paper	—	cut	15.0%	66.7 mm/s	1	—	Community source
Washi Tape	—	cut	15.0%	25.0 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	35.0%	180.0 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	85.0%	250.0 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	22.0%	150.0 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	48.0%	75.0 mm/s	2	—	Community source
Mylar Stencil 7.5mil	—	cut	25.0%	116.7 mm/s	1	—	Community source
Copy Paper 80gsm	—	cut	25.0%	133.3 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	35.0%	100.0 mm/s	1	—	Community source
Cardboard	—	cut	28.0%	50.0 mm/s	1	—	Community source
Washi Tape	—	engrave	9.0%	75.0 mm/s	1	—	Community source
Corrugated Cardboard	—	engrave	28.0%	450.0 mm/s	1	—	Community source
Corrugated Cardboard	—	engrave	20.0%	133.3 mm/s	1	—	Community source
Mylar Stencil 7.5mil	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Copy Paper 80gsm	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardstock 300gsm	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardstock	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Paper	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardboard	—	engrave	15.0%	133.3 mm/s	1	—	Community source

Sponsored · Ad space available