Two Trees TS2 10W Laser Settings

Name: Two Trees TS2 10W laser settings
Creator: MakerDial

10W diode · 0 official, 70 community settings

Open Two Trees TS2 10W in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Plywood (13 settings) · open in finder
Paper & Cardboard (8 settings) · open in finder
Leather (7 settings) · open in finder
Plastics & Laminates (6 settings) · open in finder
MDF (6 settings) · open in finder
Bamboo (5 settings) · open in finder
Foam, Rubber & Cork (5 settings) · open in finder
Fabric & Felt (4 settings) · open in finder
Hardwood (4 settings) · open in finder
Acrylic (3 settings) · open in finder
Slate, Stone & Tile (3 settings) · open in finder
Basswood (2 settings) · open in finder
Stainless steel (2 settings) · open in finder
Glass (1 settings) · open in finder
Anodized aluminum (1 settings) · open in finder

Two Trees TS2 10W settings (power, speed, passes)

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Acrylic	—	cut	100.0%	3.3 mm/s	1	—	Community source
Acrylic	—	cut	100.0%	8.3 mm/s	1	—	Community source
Plywood	—	cut	100.0%	1.7 mm/s	1	—	Community source
Plywood	—	cut	100.0%	2.5 mm/s	1	—	Community source
Plywood	—	cut	100.0%	3.3 mm/s	1	—	Community source
Plywood	—	cut	100.0%	4.7 mm/s	1	—	Community source
Plywood	—	cut	100.0%	7.5 mm/s	1	—	Community source
Plywood	—	cut	100.0%	10.0 mm/s	1	—	Community source
Polypropylene (Coroplast)	—	cut	62.0%	18.3 mm/s	2	—	Community source
Delrin / Acetal	—	cut	100.0%	11.7 mm/s	3	—	Community source
Bamboo	—	cut	100.0%	5.0 mm/s	2	—	Community source
Cotton Fabric	—	cut	80.0%	20.0 mm/s	1	—	Community source
Denim Fabric	—	cut	85.0%	16.7 mm/s	1	—	Community source
Faux Leather	—	cut	90.0%	8.3 mm/s	2	—	Community source
Kraft Paper	—	cut	60.0%	13.3 mm/s	1	—	Community source
Bamboo	—	cut	100.0%	16.7 mm/s	2	—	Community source
Cork	—	cut	50.0%	18.3 mm/s	2	—	Community source
Maple	—	cut	100.0%	13.3 mm/s	6	—	Community source
Walnut	—	cut	100.0%	13.3 mm/s	6	—	Community source
Cardstock	—	cut	35.0%	66.7 mm/s	1	—	Community source
Basswood	—	cut	95.0%	20.0 mm/s	2	—	Community source
MDF	—	cut	85.0%	3.3 mm/s	2	—	Community source
Kraft Paper	—	cut	25.0%	41.7 mm/s	1	—	Community source
Cardboard	—	cut	45.0%	25.0 mm/s	1	—	Community source
Genuine Leather	—	cut	90.0%	2.5 mm/s	3	—	Community source
Cork	—	cut	80.0%	10.0 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	cut	90.0%	13.3 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	100.0%	6.7 mm/s	2	—	Community source
Genuine Leather (Veg-Tan, ~3mm)	3.0 mm	cut	100.0%	20.0 mm/s	3	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	95.0%	20.0 mm/s	2	—	Community source
3mm Basswood Plywood	3.0 mm	cut	90.0%	5.0 mm/s	2	—	Community source
3mm MDF	3.0 mm	cut	100.0%	2.5 mm/s	4	—	Community source
Glass	—	engrave	50.0%	16.7 mm/s	1	0.05 mm	Community source
Cardboard	—	engrave	50.0%	100.0 mm/s	1	—	Community source
Stainless Steel	—	engrave	100.0%	50.0 mm/s	1	—	Community source
Genuine Leather	—	engrave	20.0%	100.0 mm/s	1	—	Community source
Acrylic	—	engrave	20.0%	100.0 mm/s	1	—	Community source
Plywood	—	engrave	50.0%	100.0 mm/s	1	—	Community source
Polypropylene (Coroplast)	—	engrave	25.0%	50.0 mm/s	1	—	Community source
HDPE (Cutting Board)	—	engrave	56.0%	33.3 mm/s	1	—	Community source

Showing 40 of 70. See all in the finder.

Sponsored · Ad space available

Two Trees TS2 10W Laser Settings

Materials with settings

Two Trees TS2 10W settings (power, speed, passes)

Similar machines