xTool D1 5W Basswood Settings (Cut & Engrave)
10 sourced settings for basswood on the xTool D1 5W (5W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Basswood | — | cut | 100.0% | 4.0 mm/s | 4 | — | Community source |
| Basswood | — | cut | 100.0% | 4.0 mm/s | 3 | — | Community source |
| Basswood | — | cut | 100.0% | 3.0 mm/s | 4 | — | Community source |
| Basswood | — | cut | 100.0% | 3.0 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 4.0 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 2.0 mm/s | 1 | — | Community source |
| Basswood | — | engrave | 100.0% | 80.0 mm/s | 1 | — | Community source |
| Basswood | — | engrave | 95.0% | 70.0 mm/s | 1 | — | Community source |
| Basswood | — | score | 80.0% | 40.0 mm/s | 1 | — | Community source |
| Basswood | — | score | 70.0% | 40.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available