Creality Falcon CR 10W Basswood Settings (Cut & Engrave)
10 sourced settings for basswood on the Creality Falcon CR 10W (10W diode), thickness 2, 4, 5, 8 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Basswood | 2 mm | cut | 100% | 5.83 mm/s | 1 | — | Official source |
| Basswood | 4 mm | cut | 100% | 3.33 mm/s | 1 | — | Official source |
| Basswood | 5 mm | cut | 100% | 2.5 mm/s | 1 | — | Official source |
| Basswood | 8 mm | cut | 100% | 3.83 mm/s | 3 | — | Official source |
| Basswood | 2 mm | engrave | 40% | 50.0 mm/s | 1 | — | Official source |
| Basswood | — | cut | 100.0% | 5.8 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 3.8 mm/s | 3 | — | Community source |
| Basswood | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 10.0 mm/s | 4 | — | Community source |
| Basswood | — | engrave | 40.0% | 66.7 mm/s | 1 | — | Community source |
Sponsored · Ad space available