Creality Falcon A1 (10W) Basswood Settings (Cut & Engrave)
9 sourced settings for basswood on the Creality Falcon A1 (10W) (10W diode), thickness 2, 3, 4, 5 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Linden planks | 2 mm | cut | 100% | 5.83 mm/s | 1 | — | Official source |
| Linden planks | 3 mm | cut | 100% | 5.83 mm/s | 1 | — | Official source |
| Linden planks | 4 mm | cut | 100% | 3.33 mm/s | 1 | — | Official source |
| Linden planks | 5 mm | cut | 100% | 2.5 mm/s | 1 | — | Official source |
| Linden planks | 2 mm | engrave | 60% | 66.67 mm/s | 1 | — | Official source |
| Balsa Wood | — | cut | 35.0% | 20.0 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 5.8 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 3.3 mm/s | 1 | — | Community source |
| Basswood | — | engrave | 60.0% | 66.7 mm/s | 1 | — | Community source |
Sponsored · Ad space available