Creality Falcon A1 Pro 20W (+2W IR) Basswood Settings (Cut & Engrave)
11 sourced settings for basswood on the Creality Falcon A1 Pro 20W (+2W IR) (20W diode + 2W infrared), thickness 2, 3, 4, 5, 10, 15 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Basswood board | 2 mm | cut | 100% | 10.0 mm/s | 1 | — | Official source |
| Basswood board | 3 mm | cut | 100% | 8.33 mm/s | 1 | — | Official source |
| Basswood board | 4 mm | cut | 100% | 6.67 mm/s | 1 | — | Official source |
| Basswood board | 5 mm | cut | 100% | 3.33 mm/s | 1 | — | Official source |
| Basswood board | 10 mm | cut | 100% | 3.33 mm/s | 2 | — | Official source |
| Basswood board | 2 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
| Basswood board | 3 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
| Basswood board | 4 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
| Basswood board | 5 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
| Basswood board | 10 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
| Basswood board | 15 mm | engrave | 30% | 83.33 mm/s | 1 | — | Official source |
Sponsored · Ad space available