Creality Falcon 2 22W Basswood Settings (Cut & Engrave)
10 sourced settings for basswood on the Creality Falcon 2 22W (22W diode), thickness 2, 3, 5, 8, 10 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Linden planks | 2 mm | cut | 100% | 11.67 mm/s | 1 | — | Official source |
| Linden planks | 3 mm | cut | 100% | 9.17 mm/s | 1 | — | Official source |
| Linden planks | 5 mm | cut | 100% | 6.67 mm/s | 1 | — | Official source |
| Linden planks | 8 mm | cut | 100% | 4.0 mm/s | 1 | — | Official source |
| Linden planks | 10 mm | cut | 100% | 2.0 mm/s | 1 | — | Official source |
| Linden planks | 2 mm | engrave | 40% | 100.0 mm/s | 1 | — | Official source |
| Basswood | — | cut | 100.0% | 11.7 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 9.2 mm/s | 1 | — | Community source |
| Basswood | — | cut | 100.0% | 6.7 mm/s | 1 | — | Community source |
| Basswood | — | cut | 80.0% | 50.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available