xTool D1 Pro 20W Paper & Cardboard Settings (Cut & Engrave & Raster engrave)

26 sourced settings for paper & cardboard on the xTool D1 Pro 20W (20W diode).

Open in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

MaterialThickJobPowerSpeedPassesIntervalSource
Metal Business Card—raster engrave40.0%50.0 mm/s1—Official source
Metal Business Card—vector engrave70.0%60.0 mm/s1—Official source
Kraft Paper—cut22.0%41.7 mm/s1—Community source
Cardstock—cut35.0%25.0 mm/s1—Community source
Washi Tape (standard roll)—cut20.0%13.3 mm/s1—Community source
Cardstock 300gsm—cut45.0%150.0 mm/s1—Community source
Corrugated Cardboard—cut90.0%200.0 mm/s1—Community source
Cardstock 300gsm—cut30.0%133.3 mm/s1—Community source
Corrugated Cardboard—cut48.0%75.0 mm/s2—Community source
Mylar Stencil 7.5mil—cut25.0%116.7 mm/s1—Community source
Copy Paper 80gsm—cut25.0%133.3 mm/s1—Community source
Cardstock 300gsm—cut35.0%100.0 mm/s1—Community source
Cardboard—cut80.0%16.7 mm/s1—Community source
Paper (cardstock 300gsm)—cut30.0%16.7 mm/s1—Community source
Cardboard (1mm card)—cut45.0%13.3 mm/s1—Community source
Cardstock—engrave12.0%83.3 mm/s1—Community source
Cardstock 300gsm—engrave15.0%450.0 mm/s1—Community source
Corrugated Cardboard—engrave30.0%400.0 mm/s1—Community source
Cardstock 300gsm—engrave15.0%150.0 mm/s1—Community source
Corrugated Cardboard—engrave20.0%133.3 mm/s1—Community source
Mylar Stencil 7.5mil—engrave15.0%133.3 mm/s1—Community source
Copy Paper 80gsm—engrave15.0%133.3 mm/s1—Community source
Cardstock 300gsm—engrave15.0%133.3 mm/s1—Community source
Kraft Paper—engrave15.0%125.0 mm/s1—Community source
Washi Tape—engrave15.0%41.7 mm/s1—Community source
Paper (cardstock 300gsm)—engrave15.0%83.3 mm/s10.1 mmCommunity source
Sponsored · Ad space available

More