xTool P2S 55W CO2 Plywood Settings (Cut & Engrave)
4 sourced settings for plywood on the xTool P2S 55W CO2 (55W CO2), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| 1/8"(3mm) Basswood Plywood | 3.0 mm | cut | 60.0% | 27.0 mm/s | 1 | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | engrave | 6.0% | 300.0 mm/s | 1 | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | engrave (fill) | 15.0% | 400.0 mm/s | 1 | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | score (line) | 10.0% | 150.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available