AtomStack A70 Max Hardwood Settings (Cut & Engrave)

Name: AtomStack A70 Max Hardwood Settings (Cut & Engrave)
Creator: MakerDial

18 sourced settings for hardwood on the AtomStack A70 Max (70W diode), thickness 18, 20, 25 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Paulownia Wood	18.0 mm	cut	90.0%	5.83 mm/s	1	—	Official source
Paulownia Wood	18.0 mm	cut	—	5.83 mm/s	1	—	Official source
Cork wood	18.0 mm	cut	90.0%	16.67 mm/s	1	—	Official source
Cork wood	18.0 mm	cut	—	16.67 mm/s	1	—	Official source
Pine	20.0 mm	cut	90.0%	2.0 mm/s	1	—	Official source
Pine	20.0 mm	cut	—	2.0 mm/s	1	—	Official source
Paulownia Wood	20.0 mm	cut	90.0%	13.33 mm/s	2	—	Official source
Paulownia Wood	20.0 mm	cut	—	13.33 mm/s	2	—	Official source
Pine	25.0 mm	cut	90.0%	18.33 mm/s	10	—	Official source
Pine	25.0 mm	cut	—	18.33 mm/s	10	—	Official source
Yellow peach wood	—	engrave (lasergrbl)	—	166.67 mm/s	1	10.0 mm	Official source
Pine	—	engrave (lasergrbl)	—	166.67 mm/s	1	10.0 mm	Official source
Paulownia Wood	—	engrave (lasergrbl)	—	166.67 mm/s	1	10.0 mm	Official source
Hard maple	—	engrave (lasergrbl)	—	166.67 mm/s	1	12.0 mm	Official source
Yellow peach wood	—	engrave (lightburn)	40.0%	166.67 mm/s	1	0.1 mm	Official source
Pine	—	engrave (lightburn)	40.0%	166.67 mm/s	1	0.1 mm	Official source
Paulownia Wood	—	engrave (lightburn)	25.0%	166.67 mm/s	1	0.1 mm	Official source
Hard maple	—	engrave (lightburn)	60.0%	166.67 mm/s	1	0.08 mm	Official source

Sponsored · Ad space available