AtomStack Kraft (20W diode + 1.2W IR) Hardwood Settings (Cut & Engrave)

Name: AtomStack Kraft (20W diode + 1.2W IR) Hardwood Settings (Cut & Engrave)
Creator: MakerDial

16 sourced settings for hardwood on the AtomStack Kraft (20W diode + 1.2W IR) (20W diode), thickness 8, 10, 12, 13 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	8.0 mm	cut	80.0%	1.67 mm/s	1	—	Official source
Cork wood	8.0 mm	cut	80.0%	9.17 mm/s	1	—	Official source
Paulownia wood	10.0 mm	cut	80.0%	1.67 mm/s	1	—	Official source
Pine	12.0 mm	cut	80.0%	5.0 mm/s	10	—	Official source
Paulownia wood	13.0 mm	cut	80.0%	14.17 mm/s	10	—	Official source
Pine	—	engrave (bitmap)	80.0%	166.67 mm/s	1	0.1 mm	Official source
peach wood	—	engrave (bitmap)	80.0%	333.33 mm/s	1	0.1 mm	Official source
Mahogany	—	engrave (bitmap)	80.0%	250.0 mm/s	1	0.1 mm	Official source
Paulownia Wood	—	engrave (bitmap)	80.0%	416.67 mm/s	1	0.1 mm	Official source
Pine	—	engrave (vector line)	15.0%	16.67 mm/s	1	—	Official source
peach wood	—	engrave (vector line)	10.0%	16.67 mm/s	1	—	Official source
Mahogany	—	engrave (vector line)	8.0%	8.33 mm/s	1	—	Official source
Paulownia Wood	—	engrave (vector line)	30.0%	16.67 mm/s	1	—	Official source
Pine	—	cut	80.0%	1.7 mm/s	1	—	Community source
Pine	—	engrave	80.0%	166.7 mm/s	1	0.1 mm	Community source
Pine	—	engrave	15.0%	16.7 mm/s	1	—	Community source

Sponsored · Ad space available