Creality Falcon 2 12W Acrylic Settings (Engrave)

Name: Creality Falcon 2 12W Acrylic Settings (Engrave)
Creator: MakerDial

12 sourced settings for acrylic on the Creality Falcon 2 12W (12W diode), thickness 3 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

⚠️ Diode lasers can't cut clear or translucent acrylic — use dark, opaque acrylic. Sources: xTool, Glowforge.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Black mirror acrylic	3 mm	engrave	80%	66.67 mm/s	1	—	Official source
Purple mirror acrylic	3 mm	engrave	50%	66.67 mm/s	1	—	Official source
Red mirrored acrylic	3 mm	engrave	50%	66.67 mm/s	1	—	Official source
Orange mirror acrylic	3 mm	engrave	50%	66.67 mm/s	1	—	Official source
Green mirror acrylic	3 mm	engrave	50%	66.67 mm/s	1	—	Official source
Red transparent acrylic	3 mm	engrave	40%	50.0 mm/s	1	—	Official source
Yellow transparent acrylic	3 mm	engrave	40%	50.0 mm/s	1	—	Official source
Green transparent acrylic	3 mm	engrave	40%	50.0 mm/s	1	—	Official source
Black frosted acrylic	3 mm	engrave	80%	50.0 mm/s	1	—	Official source
Orange frosted acrylic	3 mm	engrave	90%	20.0 mm/s	1	—	Official source
Green frosted acrylic	3 mm	engrave	90%	20.0 mm/s	1	—	Official source
Purple frosted acrylic	3 mm	engrave	90%	16.67 mm/s	1	—	Official source

Sponsored · Ad space available