Creality Falcon 2 Pro 22W Acrylic Settings (Cut & Engrave)
25 sourced settings for acrylic on the Creality Falcon 2 Pro 22W (22W diode), thickness 3, 4.6, 7.6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
⚠️ Diode lasers can't cut clear or translucent acrylic — use dark, opaque acrylic. Sources: xTool, Glowforge.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Purple Opaque Glossy Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 2 | — | Official source |
| Red Opaque Glossy Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 1 | — | Official source |
| Orange Opaque Glossy Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 2 | — | Official source |
| Green Opaque Glossy Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 3 | — | Official source |
| Red Transparent Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 3 | — | Official source |
| Yellow Transparent Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 2 | — | Official source |
| Green Transparent Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 3 | — | Official source |
| Black Frosted Acrylic | 3 mm | cut | 55% | 3.0 mm/s | 1 | — | Official source |
| Orange Frosted Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 3 | — | Official source |
| Green Frosted Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 3 | — | Official source |
| Purple Frosted Acrylic | 3 mm | cut | 55% | 2.0 mm/s | 3 | — | Official source |
| Black Acrylic | 4.6 mm | cut | 100% | 2.0 mm/s | 1 | — | Official source |
| Black Acrylic | 7.6 mm | cut | 100% | 2.0 mm/s | 2 | — | Official source |
| Black Opaque Glossy Acrylic | 3 mm | engrave | 50% | 66.67 mm/s | 1 | — | Official source |
| Purple Opaque Glossy Acrylic | 3 mm | engrave | 50% | 100.0 mm/s | 1 | — | Official source |
| Red Opaque Glossy Acrylic | 3 mm | engrave | 50% | 100.0 mm/s | 1 | — | Official source |
| Orange Opaque Glossy Acrylic | 3 mm | engrave | 50% | 100.0 mm/s | 1 | — | Official source |
| Green Opaque Glossy Acrylic | 3 mm | engrave | 50% | 100.0 mm/s | 1 | — | Official source |
| Red Transparent Acrylic | 3 mm | engrave | 20% | 50.0 mm/s | 1 | — | Official source |
| Yellow Transparent Acrylic | 3 mm | engrave | 20% | 50.0 mm/s | 1 | — | Official source |
| Green Transparent Acrylic | 3 mm | engrave | 20% | 50.0 mm/s | 1 | — | Official source |
| Black Frosted Acrylic | 3 mm | engrave | 40% | 50.0 mm/s | 1 | — | Official source |
| Orange Frosted Acrylic | 3 mm | engrave | 60% | 20.0 mm/s | 1 | — | Official source |
| Green Frosted Acrylic | 3 mm | engrave | 60% | 20.0 mm/s | 1 | — | Official source |
| Purple Frosted Acrylic | 3 mm | engrave | 60% | 16.67 mm/s | 1 | — | Official source |
Sponsored · Ad space available
More
- All Creality Falcon 2 Pro 22W settings
- AtomStack Kraft (20W diode + 1.2W IR) acrylic settings
- Creality Falcon 2 12W acrylic settings
- Creality Falcon 2 22W acrylic settings
- Creality Falcon 2 40W acrylic settings
- Creality Falcon 2 Pro 40W acrylic settings
- Creality Falcon 2 Pro 60W acrylic settings
- Laser engraving pricing calculator