Creality Falcon 2 Pro 40W Acrylic Settings (Cut & Engrave)

25 sourced settings for acrylic on the Creality Falcon 2 Pro 40W (40W diode), thickness 3, 4.6, 7.6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

⚠️ Diode lasers can't cut clear or translucent acrylic — use dark, opaque acrylic. Sources: xTool, Glowforge.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Purple Opaque Glossy Acrylic	3 mm	cut	30%	2.0 mm/s	2	—	Official source
Red Opaque Glossy Acrylic	3 mm	cut	30%	2.0 mm/s	1	—	Official source
Orange Opaque Glossy Acrylic	3 mm	cut	30%	2.0 mm/s	2	—	Official source
Green Opaque Glossy Acrylic	3 mm	cut	30%	2.0 mm/s	3	—	Official source
Red Transparent Acrylic	3 mm	cut	30%	2.0 mm/s	3	—	Official source
Yellow Transparent Acrylic	3 mm	cut	30%	2.0 mm/s	2	—	Official source
Green Transparent Acrylic	3 mm	cut	30%	2.0 mm/s	3	—	Official source
Black Frosted Acrylic	3 mm	cut	30%	3.0 mm/s	1	—	Official source
Orange Frosted Acrylic	3 mm	cut	30%	2.0 mm/s	3	—	Official source
Green Frosted Acrylic	3 mm	cut	30%	2.0 mm/s	3	—	Official source
Purple Frosted Acrylic	3 mm	cut	30%	2.0 mm/s	3	—	Official source
Black Acrylic	4.6 mm	cut	100%	3.0 mm/s	1	—	Official source
Black Acrylic	7.6 mm	cut	100%	2.0 mm/s	2	—	Official source
Black Opaque Glossy Acrylic	3 mm	engrave	26%	66.67 mm/s	1	—	Official source
Purple Opaque Glossy Acrylic	3 mm	engrave	26%	100.0 mm/s	1	—	Official source
Red Opaque Glossy Acrylic	3 mm	engrave	26%	100.0 mm/s	1	—	Official source
Orange Opaque Glossy Acrylic	3 mm	engrave	26%	100.0 mm/s	1	—	Official source
Green Opaque Glossy Acrylic	3 mm	engrave	26%	100.0 mm/s	1	—	Official source
Red Transparent Acrylic	3 mm	engrave	12%	50.0 mm/s	1	—	Official source
Yellow Transparent Acrylic	3 mm	engrave	12%	50.0 mm/s	1	—	Official source
Green Transparent Acrylic	3 mm	engrave	12%	50.0 mm/s	1	—	Official source
Black Frosted Acrylic	3 mm	engrave	22%	50.0 mm/s	1	—	Official source
Orange Frosted Acrylic	3 mm	engrave	30%	20.0 mm/s	1	—	Official source
Green Frosted Acrylic	3 mm	engrave	30%	20.0 mm/s	1	—	Official source
Purple Frosted Acrylic	3 mm	engrave	30%	16.67 mm/s	1	—	Official source

Sponsored · Ad space available

Creality Falcon 2 Pro 40W Acrylic Settings (Cut & Engrave)

Settings table

More