Creality Falcon 2 Pro 60W Acrylic Settings (Cut)

13 sourced settings for acrylic on the Creality Falcon 2 Pro 60W (60W diode), thickness 3, 4.6, 7.6 mm.

Open in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

⚠️ Diode lasers can't cut clear or translucent acrylic — use dark, opaque acrylic. Sources: xTool, Glowforge.

Settings table

MaterialThickJobPowerSpeedPassesIntervalSource
Purple Opaque Glossy Acrylic3 mmcut30%2.33 mm/s2—Official source
Red Opaque Glossy Acrylic3 mmcut30%2.33 mm/s1—Official source
Orange Opaque Glossy Acrylic3 mmcut30%2.33 mm/s2—Official source
Green Opaque Glossy Acrylic3 mmcut30%2.0 mm/s2—Official source
Red Transparent Acrylic3 mmcut30%2.67 mm/s2—Official source
Yellow Transparent Acrylic3 mmcut30%2.33 mm/s2—Official source
Green Transparent Acrylic3 mmcut30%2.0 mm/s2—Official source
Black Frosted Acrylic3 mmcut30%3.83 mm/s1—Official source
Orange Frosted Acrylic3 mmcut30%2.5 mm/s3—Official source
Green Frosted Acrylic3 mmcut30%2.0 mm/s2—Official source
Purple Frosted Acrylic3 mmcut30%2.0 mm/s2—Official source
Black Acrylic4.6 mmcut100%3.83 mm/s1—Official source
Black Acrylic7.6 mmcut100%2.67 mm/s1—Official source
Sponsored · Ad space available

More