Creality Falcon 2 40W Acrylic Settings (Cut & Engrave)

25 sourced settings for acrylic on the Creality Falcon 2 40W (40W diode), thickness 3, 4.6, 7.6 mm.

Open in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

⚠️ Diode lasers can't cut clear or translucent acrylic — use dark, opaque acrylic. Sources: xTool, Glowforge.

Settings table

MaterialThickJobPowerSpeedPassesIntervalSource
Purple mirror acrylic3 mmcut30%2.0 mm/s2—Official source
Red mirrored acrylic3 mmcut30%2.0 mm/s1—Official source
Orange mirror acrylic3 mmcut30%2.0 mm/s2—Official source
Green mirror acrylic3 mmcut30%2.0 mm/s3—Official source
Red transparent acrylic3 mmcut30%2.0 mm/s3—Official source
Yellow transparent acrylic3 mmcut30%2.0 mm/s2—Official source
Green transparent acrylic3 mmcut30%2.0 mm/s3—Official source
Black frosted acrylic3 mmcut30%3.33 mm/s1—Official source
Orange frosted acrylic3 mmcut30%2.0 mm/s3—Official source
Green frosted acrylic3 mmcut30%2.0 mm/s3—Official source
Purple frosted acrylic3 mmcut30%2.0 mm/s3—Official source
Black acrylic4.6 mmcut100%3.0 mm/s1—Official source
Black acrylic7.6 mmcut100%2.0 mm/s1—Official source
Black mirror acrylic3 mmengrave26%66.67 mm/s1—Official source
Purple mirror acrylic3 mmengrave26%100.0 mm/s1—Official source
Red mirrored acrylic3 mmengrave26%100.0 mm/s1—Official source
Orange mirror acrylic3 mmengrave26%100.0 mm/s1—Official source
Green mirror acrylic3 mmengrave26%100.0 mm/s1—Official source
Red transparent acrylic3 mmengrave12%50.0 mm/s1—Official source
Yellow transparent acrylic3 mmengrave12%50.0 mm/s1—Official source
Green transparent acrylic3 mmengrave12%50.0 mm/s1—Official source
Black frosted acrylic3 mmengrave22%50.0 mm/s1—Official source
Orange frosted acrylic3 mmengrave30%20.0 mm/s1—Official source
Green frosted acrylic3 mmengrave30%20.0 mm/s1—Official source
Purple frosted acrylic3 mmengrave30%16.67 mm/s1—Official source
Sponsored · Ad space available

More