Creality Falcon 2 22W Hardwood Settings (Cut & Engrave)

Name: Creality Falcon 2 22W Hardwood Settings (Cut & Engrave)
Creator: MakerDial

18 sourced settings for hardwood on the Creality Falcon 2 22W (22W diode), thickness 3, 5 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Walnut wood planks	3 mm	cut	100%	7.5 mm/s	1	—	Official source
Redwood	3 mm	cut	100%	7.5 mm/s	1	—	Official source
Walnut wood planks	5 mm	cut	100%	5.83 mm/s	1	—	Official source
Redwood	5 mm	cut	100%	5.83 mm/s	1	—	Official source
Walnut wood planks	3 mm	engrave	35%	100.0 mm/s	1	—	Official source
Redwood	3 mm	engrave	35%	100.0 mm/s	1	—	Official source
Cedar	—	cut	75.0%	18.3 mm/s	2	—	Community source
Alder	—	cut	100.0%	13.3 mm/s	2	—	Community source
Cherry	—	cut	95.0%	13.3 mm/s	2	—	Community source
Oak	—	cut	100.0%	13.3 mm/s	2	—	Community source
Maple	—	cut	100.0%	33.3 mm/s	3	—	Community source
Pine	—	cut	100.0%	4.2 mm/s	3	—	Community source
Maple	—	engrave	70.0%	91.7 mm/s	1	—	Community source
Cedar	—	engrave	45.0%	66.7 mm/s	1	0.1 mm	Community source
Alder	—	engrave	65.0%	46.7 mm/s	1	0.1 mm	Community source
Pine	—	engrave	55.0%	58.3 mm/s	1	0.1 mm	Community source
Cherry	—	engrave	62.0%	50.0 mm/s	1	0.1 mm	Community source
Oak	—	engrave	68.0%	46.7 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available