Creality Falcon A1 (10W) Hardwood Settings (Cut & Engrave)

18 sourced settings for hardwood on the Creality Falcon A1 (10W) (10W diode), thickness 3, 5 mm.

Open in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

MaterialThickJobPowerSpeedPassesIntervalSource
Walnut wood planks3 mmcut100%3.83 mm/s1—Official source
Redwood3 mmcut100%3.67 mm/s1—Official source
Walnut wood planks5 mmcut100%1.67 mm/s2—Official source
Redwood5 mmcut100%1.67 mm/s2—Official source
Walnut wood planks3 mmengrave30%83.33 mm/s1—Official source
Redwood3 mmengrave30%83.33 mm/s1—Official source
Walnut—cut100.0%33.3 mm/s3—Community source
Maple—cut100.0%33.3 mm/s3—Community source
Oak—cut100.0%13.3 mm/s2—Community source
Cherry—cut95.0%13.3 mm/s2—Community source
Alder—cut100.0%13.3 mm/s2—Community source
Cedar—cut75.0%18.3 mm/s2—Community source
Oak—engrave60.0%100.0 mm/s1—Community source
Cherry—engrave62.0%50.0 mm/s1—Community source
Alder—engrave65.0%46.7 mm/s1—Community source
Cedar—engrave45.0%66.7 mm/s1—Community source
Walnut—engrave70.0%91.7 mm/s1—Community source
Maple—engrave70.0%91.7 mm/s1—Community source
Sponsored · Ad space available

More