Creality Falcon A1 Pro 20W (+2W IR) Hardwood Settings (Cut & Engrave)

21 sourced settings for hardwood on the Creality Falcon A1 Pro 20W (+2W IR) (20W diode + 2W infrared), thickness 0.5, 1.5, 3, 5, 8, 10, 15, 18, 19.8 mm.

Open in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

MaterialThickJobPowerSpeedPassesIntervalSource
Wooden hang tag1.5 mmcut100%13.33 mm/s1—Official source
Walnut board3 mmcut100%6.67 mm/s1—Official source
Redwood board3 mmcut100%5.0 mm/s1—Official source
Coffee-colored wooden board3 mmcut100%5.0 mm/s1—Official source
Walnut board5 mmcut100%5.0 mm/s1—Official source
Redwood board5 mmcut100%3.33 mm/s1—Official source
Jujube wood beer glass0.5 mmengrave40%100.0 mm/s1—Official source
Wooden hang tag1.5 mmengrave40%66.67 mm/s1—Official source
Walnut board3 mmengrave10%100.0 mm/s1—Official source
Walnut board3 mmengrave55%16.67 mm/s1—Official source
Redwood board3 mmengrave5%33.33 mm/s1—Official source
Coffee-colored wooden board3 mmengrave11%116.67 mm/s1—Official source
Coffee-colored wooden board3 mmengrave60%50.0 mm/s1—Official source
Walnut board5 mmengrave10%100.0 mm/s1—Official source
Walnut board5 mmengrave55%16.67 mm/s1—Official source
Redwood board5 mmengrave5%33.33 mm/s1—Official source
Key plate8 mmengrave9%16.67 mm/s1—Official source
Pine irregular coaster10 mmengrave50%83.33 mm/s1—Official source
Pine block15 mmengrave40%83.33 mm/s1—Official source
Cell phone holder18 mmengrave11%50.0 mm/s1—Official source
Photo frame19.8 mmengrave35%100.0 mm/s1—Official source
Sponsored · Ad space available

More