Ortur Master 3 Hardwood Settings (Cut & Engrave)

Name: Ortur Master 3 Hardwood Settings (Cut & Engrave)
Creator: MakerDial

25 sourced settings for hardwood on the Ortur Master 3 (10W diode).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	—	cut	100.0%	5.0 mm/s	1	—	Community source
Pine	—	cut	100.0%	4.2 mm/s	1	—	Community source
Pine	—	cut	100.0%	1.7 mm/s	1	—	Community source
Pine	—	cut	100.0%	1.7 mm/s	2	—	Community source
Pine	—	cut	100.0%	1.7 mm/s	3	—	Community source
Pine	—	cut	100.0%	1.7 mm/s	5	—	Community source
Pine	—	cut	100.0%	1.7 mm/s	8	—	Community source
Alder	—	cut	95.0%	26.7 mm/s	3	—	Community source
Pine	—	cut	95.0%	25.0 mm/s	3	—	Community source
Cedar	—	cut	75.0%	16.7 mm/s	2	—	Community source
Alder	—	cut	100.0%	13.3 mm/s	2	—	Community source
Cherry	—	cut	95.0%	13.3 mm/s	2	—	Community source
Oak	—	cut	100.0%	11.7 mm/s	2	—	Community source
Maple	—	cut	100.0%	13.3 mm/s	6	—	Community source
Walnut	—	cut	100.0%	13.3 mm/s	6	—	Community source
Pine	—	cut	100.0%	3.3 mm/s	3	—	Community source
Pine	—	engrave	100.0%	333.3 mm/s	1	0.07 mm	Community source
Pine	—	engrave	70.0%	58.3 mm/s	1	—	Community source
Maple	—	engrave	90.0%	66.7 mm/s	1	—	Community source
Walnut	—	engrave	90.0%	66.7 mm/s	1	—	Community source
Cedar	—	engrave	48.0%	58.3 mm/s	1	0.1 mm	Community source
Alder	—	engrave	65.0%	46.7 mm/s	1	0.1 mm	Community source
Pine	—	engrave	55.0%	58.3 mm/s	1	0.1 mm	Community source
Cherry	—	engrave	62.0%	50.0 mm/s	1	0.1 mm	Community source
Oak	—	engrave	70.0%	41.7 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available