Sculpfun S30 Pro 20W Hardwood Settings (Cut & Engrave)

Name: Sculpfun S30 Pro 20W Hardwood Settings (Cut & Engrave)
Creator: MakerDial

28 sourced settings for hardwood on the Sculpfun S30 Pro 20W (20W diode), thickness 10, 15, 20, 25 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Paulownia	10.0 mm	cut	100.0%	5.3 mm/s	1	—	Official source
Paulownia	15.0 mm	cut	100.0%	4.8 mm/s	2	—	Official source
Paulownia	20.0 mm	cut	100.0%	33.3 mm/s	40	—	Official source
Pine	20.0 mm	cut	100.0%	3.3 mm/s	4	—	Official source
Paulownia	25.0 mm	cut	100.0%	33.3 mm/s	45	—	Official source
Cedar	—	cut	65.0%	60.0 mm/s	1	—	Community source
Alder	—	cut	68.0%	61.7 mm/s	1	—	Community source
Cherry	—	cut	70.0%	53.3 mm/s	2	—	Community source
Oak	—	cut	75.0%	50.0 mm/s	2	—	Community source
Pine	—	cut	70.0%	58.3 mm/s	1	—	Community source
Alder	—	cut	85.0%	16.7 mm/s	2	—	Community source
Cherry	—	cut	75.0%	18.3 mm/s	2	—	Community source
Oak	—	cut	85.0%	16.7 mm/s	2	—	Community source
Maple	—	cut	100.0%	30.0 mm/s	4	—	Community source
Walnut	—	cut	100.0%	30.0 mm/s	4	—	Community source
Cedar	—	cut	95.0%	8.0 mm/s	1	—	Community source
Cedar	—	engrave	42.0%	116.7 mm/s	1	—	Community source
Alder	—	engrave	44.0%	116.7 mm/s	1	—	Community source
Cherry	—	engrave	48.0%	108.3 mm/s	1	—	Community source
Oak	—	engrave	50.0%	108.3 mm/s	1	—	Community source
Pine	—	engrave	45.0%	116.7 mm/s	1	—	Community source
Maple	—	engrave	75.0%	83.3 mm/s	1	—	Community source
Walnut	—	engrave	75.0%	83.3 mm/s	1	—	Community source
Cedar	—	engrave	35.0%	75.0 mm/s	1	0.1 mm	Community source
Alder	—	engrave	52.0%	58.3 mm/s	1	0.1 mm	Community source
Pine	—	engrave	40.0%	75.0 mm/s	1	0.1 mm	Community source
Cherry	—	engrave	48.0%	66.7 mm/s	1	0.1 mm	Community source
Oak	—	engrave	55.0%	58.3 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available