Sculpfun S9 Hardwood Settings (Cut & Engrave)
10 sourced settings for hardwood on the Sculpfun S9 (10W diode + 5W diode), thickness 10 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Paulownia | 10.0 mm | cut | 80.0% | 4.3 mm/s | 4 | — | Official source |
| Alder | — | cut | 95.0% | 26.7 mm/s | 3 | — | Community source |
| Pine | — | cut | 95.0% | 25.0 mm/s | 3 | — | Community source |
| Maple | — | cut | 100.0% | 13.3 mm/s | 6 | — | Community source |
| Walnut | — | cut | 100.0% | 13.3 mm/s | 6 | — | Community source |
| Alder | — | engrave | 68.0% | 66.7 mm/s | 1 | — | Community source |
| Cherry | — | engrave | 70.0% | 66.7 mm/s | 1 | — | Community source |
| Pine | — | engrave | 70.0% | 58.3 mm/s | 1 | — | Community source |
| Maple | — | engrave | 90.0% | 66.7 mm/s | 1 | — | Community source |
| Walnut | — | engrave | 90.0% | 66.7 mm/s | 1 | — | Community source |
Sponsored · Ad space available