Snapmaker Artisan laser modules Hardwood Settings (Cut & Engrave & Vector engrave)
12 sourced settings for hardwood on the Snapmaker Artisan laser modules (10W diode + 20W diode + 40W diode + 2W infrared), thickness 1.5, 3, 5, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Walnut | 1.5 mm | cut | 100.0% | 5.0 mm/s | 1 | — | Official source |
| Walnut | 1.5 mm | cut | 100.0% | 14.0 mm/s | 1 | — | Official source |
| Walnut | 3.0 mm | cut | 100.0% | 4.0 mm/s | 1 | — | Official source |
| Walnut | 3.0 mm | cut | 100.0% | 12.0 mm/s | 1 | — | Official source |
| Walnut | 5.0 mm | cut | 100.0% | 2.0 mm/s | 1 | — | Official source |
| Walnut | 5.0 mm | cut | 100.0% | 9.0 mm/s | 1 | — | Official source |
| Walnut | 6.0 mm | cut | 100.0% | 1.0 mm/s | 1 | — | Official source |
| Walnut | 6.0 mm | cut | 100.0% | 8.0 mm/s | 1 | — | Official source |
| Walnut | — | engrave | 10.0% | 160.0 mm/s | 1 | 0.1 mm | Official source |
| Walnut | — | engrave | 10.0% | 160.0 mm/s | 1 | 0.1 mm | Official source |
| Walnut | — | vector engrave | 100.0% | 130.0 mm/s | 1 | — | Official source |
| Walnut | — | vector engrave | 80.0% | 120.0 mm/s | 1 | — | Official source |
Sponsored · Ad space available