xTool D1 5W Hardwood Settings (Cut & Engrave)
11 sourced settings for hardwood on the xTool D1 5W (5W diode).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Pine | — | cut | 100.0% | 5.0 mm/s | 8 | — | Community source |
| Pine | — | cut | 100.0% | 3.0 mm/s | 2 | — | Community source |
| Pine | — | cut | 100.0% | 5.0 mm/s | 2 | — | Community source |
| Walnut | — | cut | 100.0% | 6.0 mm/s | 3 | — | Community source |
| Pine | — | engrave | 100.0% | 75.0 mm/s | 1 | — | Community source |
| Pine | — | engrave | 100.0% | 90.0 mm/s | 1 | — | Community source |
| Walnut | — | engrave | 50.0% | 90.0 mm/s | 1 | — | Community source |
| Pine | — | score | 100.0% | 30.0 mm/s | 1 | — | Community source |
| Pine | — | score | 100.0% | 50.0 mm/s | 1 | — | Community source |
| Pine | — | score | 100.0% | 20.0 mm/s | 1 | — | Community source |
| Walnut | — | score | 100.0% | 25.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available