xTool D1 Pro 20W Acrylic Settings (Cut & Engrave & Raster engrave)

Name: xTool D1 Pro 20W Acrylic Settings (Cut & Engrave & Raster engrave)
Creator: MakerDial

18 sourced settings for acrylic on the xTool D1 Pro 20W (20W diode), thickness 2, 3 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

⚠️ Diode lasers can't cut clear or translucent acrylic — use dark, opaque acrylic. Sources: xTool, Glowforge.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Brown Opaque Glossy Acrylic	2.0 mm	cut	100.0%	5.0 mm/s	3	—	Official source
Dark Red Acrylic Sheet（Opaque,Glossy)	3.0 mm	cut	100.0%	3.0 mm/s	3	—	Official source
Brown Opaque Glossy Acrylic	2.0 mm	raster engrave	40.0%	50.0 mm/s	1	—	Official source
Dark Red Acrylic Sheet（Opaque,Glossy)	3.0 mm	raster engrave	40.0%	50.0 mm/s	1	—	Official source
Brown Opaque Glossy Acrylic	2.0 mm	vector engrave	50.0%	40.0 mm/s	1	—	Official source
Dark Red Acrylic Sheet（Opaque,Glossy)	3.0 mm	vector engrave	30.0%	40.0 mm/s	1	—	Official source
Acrylic Felt	—	cut	50.0%	75.0 mm/s	1	—	Community source
Acrylic (3mm black cast)	—	cut	100.0%	3.3 mm/s	3	—	Community source
3mm Tinted Acrylic	3.0 mm	cut	100.0%	6.7 mm/s	3	—	Community source
3mm Coloured Acrylic	3.0 mm	cut	90.0%	30.0 mm/s	2	—	Community source
3mm Black Acrylic	3.0 mm	cut	95.0%	26.7 mm/s	2	—	Community source
3mm Black Acrylic	3.0 mm	cut	100.0%	3.3 mm/s	2	—	Community source
Acrylic Felt	—	engrave	25.0%	133.3 mm/s	1	—	Community source
Acrylic (3mm mirrored)	—	engrave	35.0%	50.0 mm/s	1	0.1 mm	Community source
3mm Black Acrylic	3.0 mm	engrave	100.0%	50.0 mm/s	1	—	Community source
3mm Tinted Acrylic	3.0 mm	engrave	70.0%	50.0 mm/s	1	—	Community source
3mm Black Acrylic	3.0 mm	engrave	50.0%	66.7 mm/s	1	—	Community source
3mm Black Acrylic	3.0 mm	score	30.0%	40.0 mm/s	1	—	Community source

Sponsored · Ad space available