xTool D1 Pro 20W Hardwood Settings (Cut & Engrave)

Name: xTool D1 Pro 20W Hardwood Settings (Cut & Engrave)
Creator: MakerDial

24 sourced settings for hardwood on the xTool D1 Pro 20W (20W diode).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Cedar	—	cut	85.0%	36.7 mm/s	2	—	Community source
Alder	—	cut	88.0%	36.7 mm/s	2	—	Community source
Cherry	—	cut	90.0%	33.3 mm/s	2	—	Community source
Oak	—	cut	95.0%	30.0 mm/s	3	—	Community source
Pine	—	cut	90.0%	33.3 mm/s	2	—	Community source
Cedar	—	cut	75.0%	11.7 mm/s	2	—	Community source
Alder	—	cut	80.0%	13.3 mm/s	2	—	Community source
Pine	—	cut	75.0%	13.3 mm/s	2	—	Community source
Cherry	—	cut	85.0%	13.3 mm/s	2	—	Community source
Oak	—	cut	100.0%	11.7 mm/s	2	—	Community source
Maple	—	cut	85.0%	13.3 mm/s	2	—	Community source
Walnut	—	cut	100.0%	11.7 mm/s	2	—	Community source
Cedar	—	engrave	55.0%	91.7 mm/s	1	—	Community source
Alder	—	engrave	58.0%	91.7 mm/s	1	—	Community source
Cherry	—	engrave	60.0%	91.7 mm/s	1	—	Community source
Oak	—	engrave	65.0%	91.7 mm/s	1	—	Community source
Pine	—	engrave	60.0%	83.3 mm/s	1	—	Community source
Cedar (3mm)	—	engrave	45.0%	41.7 mm/s	1	0.1 mm	Community source
Alder (hardwood 3mm)	—	engrave	50.0%	50.0 mm/s	1	0.1 mm	Community source
Pine (3mm)	—	engrave	45.0%	50.0 mm/s	1	0.1 mm	Community source
Cherry (hardwood 3mm)	—	engrave	55.0%	50.0 mm/s	1	0.1 mm	Community source
Oak (hardwood 3mm)	—	engrave	65.0%	41.7 mm/s	1	0.1 mm	Community source
Maple (hardwood 3mm)	—	engrave	55.0%	50.0 mm/s	1	0.1 mm	Community source
Walnut (hardwood 3mm)	—	engrave	70.0%	41.7 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available