xTool M1 10W Acrylic Settings (Bitmap engrave & Cut & Engrave)

Name: xTool M1 10W Acrylic Settings (Bitmap engrave & Cut & Engrave)
Creator: MakerDial

10 sourced settings for acrylic on the xTool M1 10W (10W diode), thickness 3 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

⚠️ Diode lasers can't cut clear or translucent acrylic — use dark, opaque acrylic. Sources: xTool, Glowforge.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Brown Opaque Glossy Acrylic	3.0 mm	bitmap engrave	50.0%	130.0 mm/s	1	—	Official source
Dark Red Opaque Glossy Acrylic	3.0 mm	bitmap engrave	30.0%	100.0 mm/s	1	—	Official source
Orange Opaque Glossy Acrylic	3.0 mm	bitmap engrave	70.0%	130.0 mm/s	1	—	Official source
Green Opaque Glossy Acrylic	3.0 mm	bitmap engrave	40.0%	75.0 mm/s	1	—	Official source
Brown Opaque Glossy Acrylic	3.0 mm	fill engrave	35.0%	130.0 mm/s	1	—	Official source
Brown Opaque Glossy Acrylic	3.0 mm	line cut	100.0%	4.0 mm/s	3	—	Official source
Orange Opaque Glossy Acrylic	3.0 mm	line cut	100.0%	3.0 mm/s	3	—	Official source
Brown Opaque Glossy Acrylic	3.0 mm	line engrave	50.0%	40.0 mm/s	1	—	Official source
3mm Tinted Acrylic	3.0 mm	cut	85.0%	5.0 mm/s	1	—	Community source
3mm Tinted Acrylic	3.0 mm	engrave	100.0%	60.0 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available