xTool S1 40W diode Hardwood Settings (Cut & Engrave)

Name: xTool S1 40W diode Hardwood Settings (Cut & Engrave)
Creator: MakerDial

26 sourced settings for hardwood on the xTool S1 40W diode (40W diode).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	—	cut	100.0%	12.5 mm/s	1	—	Community source
Cedar	—	cut	60.0%	66.7 mm/s	1	—	Community source
Alder	—	cut	62.0%	70.0 mm/s	1	—	Community source
Cherry	—	cut	65.0%	63.3 mm/s	1	—	Community source
Oak	—	cut	70.0%	58.3 mm/s	2	—	Community source
Pine	—	cut	65.0%	66.7 mm/s	1	—	Community source
Maple	—	cut	90.0%	58.3 mm/s	2	—	Community source
Walnut	—	cut	90.0%	58.3 mm/s	2	—	Community source
Cedar	—	cut	90.0%	9.2 mm/s	1	—	Community source
Alder	—	cut	100.0%	6.7 mm/s	2	—	Community source
Pine	—	cut	100.0%	8.3 mm/s	1	—	Community source
Cherry	—	cut	100.0%	6.7 mm/s	2	—	Community source
Oak	—	cut	100.0%	5.8 mm/s	2	—	Community source
Pine	—	engrave	65.0%	83.3 mm/s	1	—	Community source
Cedar	—	engrave	38.0%	125.0 mm/s	1	—	Community source
Alder	—	engrave	40.0%	125.0 mm/s	1	—	Community source
Cherry	—	engrave	42.0%	116.7 mm/s	1	—	Community source
Oak	—	engrave	45.0%	116.7 mm/s	1	—	Community source
Pine	—	engrave	40.0%	125.0 mm/s	1	—	Community source
Maple	—	engrave	55.0%	116.7 mm/s	1	—	Community source
Walnut	—	engrave	55.0%	116.7 mm/s	1	—	Community source
Cedar	—	engrave	30.0%	83.3 mm/s	1	0.1 mm	Community source
Alder	—	engrave	42.0%	66.7 mm/s	1	0.1 mm	Community source
Pine	—	engrave	35.0%	83.3 mm/s	1	0.1 mm	Community source
Cherry	—	engrave	40.0%	75.0 mm/s	1	0.1 mm	Community source
Oak	—	engrave	45.0%	66.7 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available