xTool P3 80W CO2 Hardwood Settings (Cut & Engrave)
12 sourced settings for hardwood on the xTool P3 80W CO2 (80W CO2), thickness 6.35, 12.7, 19 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| 1/4 in solid maple | 6.35 mm | cut | 100% | 15 mm/s | — | — | Community source |
| 1/4 in solid walnut | 6.35 mm | cut | 100% | 15 mm/s | — | — | Community source |
| 1/2 in solid maple | 12.7 mm | cut | 100% | 3 mm/s | — | — | Community source |
| 1/2 in solid walnut | 12.7 mm | cut | 100% | 3 mm/s | — | — | Community source |
| Poplar (solid) | 19 mm | cut | 100% | 3 mm/s | 1 | — | Community source |
| Solid hardwood | 19 mm | cut | 100% | 4 mm/s | 1 | — | Community source |
| Solid pine | 19 mm | cut | 90% | 4 mm/s | 1 | — | Community source |
| 1/4 in solid maple | 6.35 mm | engrave | 20% | 400 mm/s | — | — | Community source |
| 1/4 in solid walnut | 6.35 mm | engrave | 20% | 400 mm/s | — | — | Community source |
| 1/2 in solid maple | 12.7 mm | engrave | 20% | 400 mm/s | — | — | Community source |
| 1/2 in solid walnut | 12.7 mm | engrave | 20% | 400 mm/s | — | — | Community source |
| Solid pine | 19 mm | engrave | 80% | 45 mm/s | 1 | — | Community source |
Sponsored · Ad space available